Automobile Oil – Keeping Your Car Young and Happy

When people think about the good life, they tend to think in terms of freedom from pressure, discomfort, and friction. If your car could talk, it would probably agree. When you consider that the temperature in your vehicle’s combustion chambers can get as high as 4,500°F, with high pressures, the shock of combustion and many metal parts rubbing and grinding against one another, you can see that a vehicle that’s not adequately protected against heat and friction will swiftly come to an untimely death.

Luckily, this kind of protection is cheap and easy to ensure. It’s a simple matter of providing sufficient lubrication to keep things running smoothly and then making sure that your vehicle gets regular attention. Changing the oil is the most essential thing you can do to give your vehicle a long and happy life.

And changing the oil regularly is a gift that keeps on giving because an engine that keeps its cool and operates with less effort uses less fuel. So if you change your oil on a regular basis, you can cut fuel consumption, which in turn reduces the carbon dioxide emissions that contribute to global warming.

Such a deal! This chapter tells you how to choose the right kind of oil for your vehicle, how frequently you should change the oil for maximum performance, and how to do the job quickly and easily. Whenever you encounter a term set in this font, you’ll find it defined in the glossary in Appendix A.

How Oil Benefits Your Vehicle

To choose the proper kind of oil, you should know what that oil is expected to do. When your engine isn’t running, the oil slops around quietly in a container called the oil pan, which is located at the bottom of the crankcase just below the engine.

When the engine is running, oil is pumped by an oil pump through holes and channels in the engine, where the oil helps to cool and clean the engine and provides a nice, slippery cushion that keeps moving parts from grinding one another into oblivion. The following sections explain in greater detail how oil benefits your vehicle.

Oil cools the engine

Because the oil pan is located below the engine, where the air that rushes past the moving vehicle can cool it, the oil picks up some of the heat as it travels around inside the engine and then cools off when it circulates through the oil pan. Although this isn’t enough to keep most engines sufficiently cool without a cooling system, it helps.

Oil keeps your engine clean

Most engine oils contain some detergent, which helps flush out the muck that accumulates inside your engine. Not only does detergent remove and dissolve this old sludge, but it also helps prevent new gobs of the stuff from forming. Believe me, you have no idea of the meaning of any of those yucky words until you’ve looked into the engine of a vehicle that hasn’t had its oil changed often enough.

Masses of black slimy stuff, hunks of indefinable vileness, and pebble-like particles cling to everything. It’s hard to see how these engines function at all. Even more depressing are the all-too-visible signs of wear on steel parts that have been eroded away by this ugly stuff or have succumbed to friction because the oil lost its ability to protect them. If your vehicle hasn’t had its oil changed often enough, you can consider the growls coming out of its engine to be cries of pain!

Oil cuts down on friction

By far the most important thing that the oil in your engine does is to form a cushion between moving parts to help them slide past one another easily. This lubrication cuts down friction, which in turn dramatically reduces the heat and wear that friction can cause.

shows you how oil cuts down on friction. As you can see, each piston is attached to a connecting rod. Each connecting rod has a hole in it with a bearing that the crankshaft fits through, enabling the crankshaft and the connecting rod to operate together. Now take a closer look at the enlarged portion of the figure: Notice that there’s a space around the crankshaft that’s always filled with oil. When the engine is running, the oil pressure forms a cushion that keeps the connecting rod bearings from ever touching the crankshaft.

Last word

Instead, each bearing moves on its cushion of oil to prevent friction and wear, which is important because the rod exerts 4,000 pounds of pressure every time it moves down.

This arrangement has additional benefits: If the bearings wear, replacing them is much less costly than replacing the connecting rod or the crankshaft. This same principle applies to other moving parts in your vehicle.

About Mendis

Check Also

Choosing the Right Oil for Your Vehicle

If all the preceding variables have you wondering how you’re going to choose the right …

Leave a Reply

Your email address will not be published. Required fields are marked *